eQuipt Evaporative Cooler – 150W
A compact, portable 150W evaporative cooler delivering up to 6,000 m³ of airflow per hour, ideal for smaller workshop spaces. Cools without chemicals or refrigerants and reduces ambient temperatures by up to 10°C.
- One-piece polyethylene housing, rust & leak proof
- Two freezable ice blocks included
- Eco-friendly alternative to reverse-cycle A/C
- Cools without chemicals or refrigerants
Description
With its compact size, this eQuipt 'Designed to Deliver' Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C. Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Two freezable ice blocks included to assist in reducing water tank temperatures
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Easy to remove cooling pads & filters for quick & easy maintenance
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight gauge
- Manual pop-out filler door on front of unit
- Direct drive motor
- LCD 12.5 hour timer panel
- Nylon castors for easy portability
Specifications
| Power Unit | 220V 50Hz 150W 10amp plug |
|---|---|
| Operating Current | 1.45A |
| Max. Air Flow | 6,000 m³ per hour |
| Noise Level | 65dB(A) |
| Fan Diameter | 400mm 4-blade propeller |
| Speed Control | 3-speed |
| Effective Cooling Area | 45-55m² |
| Water Consumption | 4-5 Litres per hour |
| Water Tank Capacity | 45 Litres |
| Dimension | 1185(H) x 620(W) x 430(D) |
| Net Weight | 17kg |
| Gross Weight | 20kg |
Intended Use
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather. This product is an Industrial Product and not suitable for household use.
Resources
Important note
Water Consumption can increase by 300% due to ‘Relative Humidity’
Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels.
Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50%(rh), the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature.
Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
About eQuipt
You may also like
TradeQuip Workshop Fan Floor 450mm
Product Code: 1045
TradeQuip Portable Industrial Spot Cooling Air Conditioner 4.5kW
Product Code: 1032T
TradeQuip Portable Industrial Spot Cooling Air Conditioner – 2.7kW
Product Code: 1031T
