eQuipt Evaporative Cooler – 200W
A compact, portable eQuipt evaporative cooler ideal for smaller workshops, delivering high airflow and reducing ambient temperatures by up to 10°C without chemicals or refrigerants.
- One-piece polyethylene housing, rust & leak proof
- Eco-friendly alternative to reverse-cycle A/C
- Cools without chemicals or refrigerants
- Removable cooling pads and filters
Description
With its compact size, this eQuipt "Designed to Deliver" Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. The cooler features a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Easy to remove cooling pads & filters for quick & easy maintenance
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4" hose fitting for automatic tap refill
- Conveniently located drain valve at bottom of tank for easy access
- LCD 12 hour timer panel
- Nylon castors for easy portability
Specifications
| Power Unit | 220V 50Hz 200W 10amp plug |
|---|---|
| Operating Current | 2.4A |
| Power Cord Length | 2300mm |
| Max. Air Flow | 9,000 m³ per hour |
| Noise Level | 70dB(A) |
| Speed Control | 3-speed |
| Fan Diameter | 520mm 4-blade propeller |
| Effective Cooling Area | 50-60m² |
| Water Consumption | 5-6 Litres per hour |
| Water Tank Capacity | 70 Litres |
| Dimensions | 1360(H) x 820(W) x 545(D) |
| Net Weight | 33kg |
| Gross Weight | 36kg |
Intended Use
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather. This product is an Industrial Product and not suitable for household use.
Resources
Important note
Water Consumption can increase by 300% due to ‘Relative Humidity’
Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels.
Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50%(rh), the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature.
Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
About eQuipt
You may also like
TradeQuip Ventilation Fan 400mm
Product Code: 1056
TradeQuip Workshop Fan Floor 450mm
Product Code: 1045
TradeQuip Ventilation Fan 450mm
Product Code: 1141T
