Skip to content

Borum Manual King Pin Press Kit 16,000kg

Product Code: BR39-0390

A 16,000kg manual king pin press that one technician fits on the axle to push out straight and tapered king pins from 7/8″ to 2-5/32″, supplied with three forcing screws and three tie rod end removers in a storage case.

  • 16,000kg pressing capacity
  • One-person operation
  • Straight and tapered king pins
  • Suits king pins 7/8" to 2-5/32"
  • Includes 3 tie rod end removers

Description

The Borum Manual King Pin Press Kit (BR39-0390) pushes out straight and tapered king pins from commercial-vehicle steering axles, with up to 16,000kg (16 tonnes) of force from a manual forcing screw. It is built for one-person operation: once the wheel, hub and brake components are removed and the tie rod end has been freed with the supplied removers, one technician fits it around the king pin on the axle and drives the forcing screw with an impact wrench or a hand-operated drive tool.

The screw plate sits over the top of the king pin and the clearance plate beneath it, joined by four 5/8"-11 x 15" socket head cap screws. Two torque arms brace against the axle to resist the press twisting under load, and the forcing screw is wound down onto the king pin until it drops out through the clearance plate.

Three hardened alloy steel forcing screws cover kingpins from 7/8" to 2-5/32" (22.2 to 54.8mm): a 1-1/4" long screw, a 1-1/4" short screw for tight clearance above the king pin, and a 7/8" long screw that works with the supplied reducer and anvil for king pins under 1-1/4". Three tie rod end removers (7/8"-14, 3/4"-16 and M20 x 1.5) free the tie rod end before the king pin is pressed out.

Features

  • 16,000kg (16 tonne) pressing capacity from a manual forcing screw, with no hydraulics
  • One-person operation
  • Removes straight and tapered king pins from 7/8" to 2-5/32" (22.2 to 54.8mm)
  • Three forcing screws: 1-1/4" long, 1-1/4" short for tight clearance above the king pin, and 7/8" long for king pins under 1-1/4"
  • 7/8" anvil and reducer for the 7/8" screw, and a 1-1/4" anvil shared by both 1-1/4" screws
  • Two torque arms brace against the axle to resist twisting under load
  • Three tie rod end removers (7/8"-14, 3/4"-16 and M20 x 1.5) to free the tie rod end first
  • Hardened alloy steel forcing screws (38-42 HRC)
  • Drive the forcing screw with a controllable impact wrench (never above 750Nm) or a hand-operated drive tool
  • Supplied in a storage case

Specifications

Safe Working Capacity16,000kg
OperationManual forcing screw (impact wrench or hand-operated drive tool)
King Pin Diameter Range7/8" to 2-5/32" (22.2 to 54.8mm)
King Pin TypeStraight and tapered
Maximum Impact Wrench Torque750Nm (550ft-lb)
Forcing Screws1-1/4" long, 1-1/4" short and 7/8" long
Forcing Screw MaterialHardened alloy steel, 38-42 HRC
Tie Rod End Removers7/8"-14, 3/4"-16 and M20 x 1.5
Plate Screws4 x 5/8"-11 x 15" socket head cap screws
Torque Arms2, with 5/8"-11 x 6" tap bolts
Net Weight15.5kg
Carton540 x 430 x 135mm
Gross Weight16.5kg
Warranty12 months (trade use)

Intended Use

Removing compatible king pins and tie rod ends from commercial-vehicle steering axles, for trained automotive and heavy-vehicle technicians. Not for lifting or supporting vehicles, compressing suspension springs, removing bearings or straightening parts.

Resources

What's in the Kit

  • Screw plate and clearance plate
  • 2 torque arms with 5/8″-11 x 6″ tap bolts
  • 4 x 5/8″-11 x 15″ socket head cap screws
  • Forcing screws: 1-1/4″ long, 1-1/4″ short and 7/8″ long
  • 1-1/4″ anvil, 7/8″ anvil and 7/8″ reducer with 2 x 1/2″-13 x 1-1/2″ socket head cap screws
  • Tie rod end removers: 7/8″-14, 3/4″-16 and M20 x 1.5
  • 2 O-rings
  • Storage case

About BORUM

Our "heavy duty commercial" range of Borum Industrial equipment has been manufactured to exacting standards for over 40 years. We specify industrial quality components and design to ensure a long and durable working life in commercial transport, mining, earthmoving and railway environments. Our Borum Industrial range of equipment is focused on achieving superior professional standards, reliability, quality, and is covered by a 12 month trade use warranty.